Smeg 



cooker, Instructions For Use Manual

16

Instructions for the user

EN

7.7

Electronic programmer (on some models only)

LIST OF FUNCTIONS

   Timer key

   End of cooking key

   Cooking duration key

   Value decrease key

   Value increase key

7.7.1 Setting the time

On the first use, or after a power failure, 

 will be flashing on the appliance's display. Press the

 and 

 keys together, and at the same time press the value adjustment keys 

 or 

: this will

increase or decrease the setting by one minute for each pressure.
Press either of the value modification keys to display the current time.
Before each programmer setting, activate the required function and temperature.

7.7.2 Semi-automatic cooking

Semi-automatic cooking is the function which allows a cooking operation to be started and then ended
after a specific length of time set by the user.

Press the 

 key and the display will light up showing the figures 

; keep it pressed, and at the

same time use the keys 

 or 

 to set the cooking duration.

When 

 is released, the count of the programmed cooking duration will start and the display will show

the current time together with 

 and 

A 

(to indicate that a programmed cooking operation has been

set).

7.7.3 Automatic cooking

This function switches the oven on and off entirely automatically.

Press the 

 key and the display will light up showing the figures 

; keep it pressed, and at the

same time use the value modification keys 

 or 

 to set the cooking duration.

Press the 

 key and the display will show the sum of the current time plus the cooking duration: keep

it pressed, and at the same time use the value modification keys 

 or 

 to adjust the end of cooking

time.

When 

 is released, the programmed count will start and the display will show the current time

together with the symbols 

A

 and 

.

After making the setting, press the 

 key to view the remaining cooking time; press the 

 key to view

the cooking end time. The logic prevents the setting of incompatible values (e.g. the programmer will not
accept a cooking end time with a duration which is too long for its value).