Use
66
Setting the time
When the appliance is used for the first
time, or after a power cut, the clock
indicator light
flashes on the clock.
1. Turn the setting knob to the left or right to
set the current time.
2. After approximately 5 seconds, the clock
indicator light
turns off and the clock
resumes normal operation.
It may become necessary to change the
current time, for example for daylight saving
time.
3. To further adjust the clock, ensure that
there is no function active (the
temperature knob
and the
function knob
must be in the
0
position).
4. Turn the setting knob to the left or right.
Operating modes
Stand-by:
When no function is selected, the
clock shows the current time
.
ON
: The function knob must be turned to
any position other than
0
to start any
function. The clock shows the parameters
set such as temperature, duration and
reaching of the set temperature.
