Use
69
EN
15. Press the confirmation knob to start
drawing water into the appliance's
reservoir.
16. When the appliance has finished taking
in water (indicated by a buzzer), shake
the tube to remove any residual water.
17. Return the tube to its original position,
remove the container of water and close
the door.
18. Press the confirmation knob to start
steaming.
The appliance will automatically
draw the quantity of water
necessary for cooking on the basis
of the set duration.
In the event that the water runs out,
the appliance will automatically
stop the cooking process, a
buzzer will sound and the display
will show a request to fill the
reservoir with water.
When the door is closed, an
automatic system will automatically
draw in any residual water in the
tube to avoid drips. A bubbling
noise may be heard; this is
completely normal.
Each time the door is opened, the
function in progress will stop and
then automatically restart when the
door is closed again.
To stop cooking at any point, hold
down the confirmation knob for a
few seconds and return the
function knob and temperature
knob to the
0
position.
