Use
90
P2: Showroom (for exhibitors only)
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
To use the appliance normally, set this
mode to
OFF
.
P3: Eco-Logic
This mode allows the appliance to limit the
power used.
Suitable for simultaneous use with further
home appliances.
HI:
normal power.
LO:
low power.
P4: Keep Warm
This mode allows the appliance to keep
cooked food warm (at low temperatures)
for around an hour after cooking finishes
with a cooking cycle for which a duration
has been set (if this is not manually
interrupted).
P5: Water hardness
This mode allows you to set the water
hardness value in order to optimise the
descaling process.
It is possible to modify the water hardness
setting from a minimum of
to
a maximum of
.
If this mode is active,
will be shown on the display for 3
seconds every minute.
Activating eco-logic mode means
that preheating and cooking times
may be extended.
If this mode is active, the message
will appear on the
display at the end of traditional cooking
.
The appliance is factory set for
water of medium hardness.
Request information on the
hardness of your water from your
local water board.
If your mains water supply is too
hard, we recommend
using a water softener.