Use
89
EN
3.8 Secondary menu
The appliance also has a drop-down
secondary menu allowing the user to:
• Activate or deactivate the Child lock.
• Activate or deactivate Showroom mode
(which disables all the heating elements
so that only the control panel works).
• Activate or deactivate Eco-Logic mode.
• Activate or deactivate Keep Warm mode.
• Set the water hardness value.
With the appliance in Stand-By
(temperature and function knobs set to
0
):
1. Hold down the setting knob and
confirmation knob simultaneously for 5
seconds.
2. Turn the setting knob to the left or right to
change the setting (
ON
/
OFF
).
3. Press the setting knob to switch to the next
mode.
P1: Child Lock
This mode allows the appliance to lock the
controls automatically after one minute of
normal operation without any intervention
from the user.
One minute after the last setting the lock will
become active again.
To temporarily release the lock during
cooking, press and hold the setting knob for
5 seconds. One minute after the last setting
the lock will become active again.
On touching or varying the
position of the temperature and
function knobs, the display will
show
for
two
seconds.
It is still possible to turn the
appliance off instantaneously with
the child lock active by returning
the function knob to the
0
position.
