Cleaning and maintenance
96
4.9 Auxiliary cleaning and
maintenance functions
CLEAN: reservoir cleaning
1. Turn the function knob to the
auxiliary
functions
symbol.
2. Turn the setting knob to select
CLEAN
.
3. Press the confirmation knob to confirm the
selected function.
4. Press the confirmation knob: the
messages
and
will flash on the display to
indicate the request to fill the reservoir.
5. Fill a container (e.g. a jug) with a solution
of water and citric acid.
6. Open the oven door.
7. Rest the container on the open door.
8. Extract the tube from its seat and immerse
its end in the container until it reaches all
the way to the bottom.
9. Press the confirmation knob to start
drawing the solution into the appliance’s
reservoir.
The function knob provides access
to the appliance’s auxiliary functions
in this position.
To guarantee optimum
performance of your appliance,
we recommend cleaning the
reservoir every 2-3 months.
We recommend mixing 30 g of
citric acid with 1.5 litres of water.
Note: the container with the
solution must have a gross weigh
lower than 5 kg.
The appliance will automatically
draw sufficient solution to fill the
reservoir.