Instructions for the installer
32
2. TRANSPORT
3. INTENDED USE OF THE FRIDGE
Attention:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE TO THE APPLIANCE CAUSED
BY FAILURE TO OBSERVE THE TRANSPORT INSTRUCTIONS.
- The appliance should always be transported in a vertical position!
- During transport, the appliance must be protected against atmospheric agents (rain, snow, humidity).
- In the transport vehicle, the appliance must be secured solidly and in a correct position, to avoid it
sliding or being knocked.
- If the appliance has not been transported in a vertical position, it cannot be connected to the
electricity supply for at least 4 hours. Otherwise, the compressor of the appliance could get damaged.
This is a combined appliance with two compartments ( freezer): The fridge compartment is
intended for storing fresh foods; the freezer compartment is intended for freezing and long-term storage
of foods.
Attention:
THE MANUFACTURER GUARANTEES RELIABLE OPERATION OF THE FRIDGE FREEZER WHEN
THE AMBIENT TEMPERATURE IS B16 AND +32 DEGREES CELSIUS AND THE
RELATIVE HUMIDITY OF THE AIR IS NO GREATER THAN 70 PERCENT.
The appliance has not been designed and manufactured for professional use.
The fridge freezer has undergone the necessary leakage tests for the coolant loop and meets the safety
requirements applicable to electrical appliances.
Attention:
the manufacturer cannot be held liable for any personal injury or property damage caused by
failure to observe the above requirements or by tampering with any part of the appliance or using
non-original spare parts.
