FAILURE
PROBABLE
CAUSE
METHODS OF
ELIMINATION
The washing result
is bad.
Clothes exceeding
the maximum
capacity has been
filled in your
machine.
Lighten the load.
Your water may be
hard.
Use the amount of
detergent according to
the declaration of the
detergent producer.
Distribution of the
clothes in your
machine is not well-
balanced.
Spread the clothes
inside the machine in
an orderly and well-
balanced manner .
The water is
drained from the
machine as soon
as it is filled.
The end of the water
drain hose is in a
position too low
according to the
machine.
Place the water drain
hose in an appropriate
height.(**)
No water is seen in
the drum during
washing.
No failure. The water
is at the lower part of
the drum.
-
There are residues
of detergent on the
clothes.
The pieces of some
detergents which do
not dissolve in water
may stick to your
clothes as white
stains.
By calibrating your
machine for “Rinsing”
programme,make an
additional rinsing or
eliminate the stains
After drying with the
help of a brush.
There are grey
stains on the
clothes.
These stains may be
caused by oil,cream
or ointment .
In the next washing
operation, use the
maximum detergent
amount declared by the
detergent producer.
(**) See the section concerning installations your machine.
47
CHAPTER -10: TROUBLESHOOTING
