background image

 

18 

 

EN - Instruction on mounting and use  

Consult the designs in the front pages referenced in the text 
by alphabet letters. 

Closely follow the instructions set out in this manual. 

All 

responsibility,  for any eventual inconveniences, damages or 
fires caused by not complying with the instructions in this 
manual, is declined.  

 

  Caution 

WARNING!

 Do not connect the appliance to the mains until 

the installation is fully complete.  
Before any cleaning or maintenance operation, disconnect the 
hood from the mains by removing the plug or disconnecting 
the home mains switch.  
Always wear work gloves for all installation and maintenance 
operations. 
The appliance is not intended for use by children or persons 
with impaired physical, sensorial or mental faculties, or if 
lacking in experience or know-how, unless they are under 
supervision or have been trained in the use of the appliance 
by a person responsible for their safety. 
Children should be monitored to ensure that they do not play 
with the appliance. 
Never use the hood without effectively mounted grating.! 
The hood must NEVER be used as a support surface unless 
specifically indicated. 
The premises must be sufficiently ventilated, when the kitchen 
hood is used together with other gas combustion devices or 
other fuels.  
The suctioned air must not be conveyed into a conduit used 
for the disposal of the fumes generated by appliances that 
combust gases or other fuels. 
The flaming of foods beneath the hood itself is severely 
prohibited. 
The use of exposed flames is detrimental to the filters and 
may cause a fire risk, and must therefore be avoided in all 
circumstances.  
Any frying must be done with care in order to make sure that 
the oil does  not overheat and burst into flames. 
As regards the technical and safety measures to be adopted 
for fume discharging it is important to closely follow the 
relations provided by the competent authorities.  
The hood must be regularly cleaned on both the inside and 
outside (AT LEAST ONCE A MONTH, it is in any event 
necessary to proceed in accordance with the maintenance 
instructions provided in this manual).. 
Failure to follow the instructions as concerns hood and filter 
cleaning will lead to the risk of fires. 
Do not use or leave the hood without the lamp correctly 
mounted because of the possible risk of electric shocks. 
We decline any responsibility for any problems, damage or 
fires caused to the appliance as the result of the non-
observance of the instructions included in this manual. 
This appliance is marked according to the European directive 
2002/96/EC on Waste Electrical and Electronic Equipment 

(WEEE). By ensuring this product is disposed of correctly, you 
will help prevent potential negative consequences for the 
environment and human health, which could otherwise be 
caused by inappropriate waste handling of this product. 

The symbol 

 on the product, or on the documents 

accompanying the product, indicates that this appliance may 
not be treated as household waste. Instead it should be taken 
to the appropriate collection point for the recycling of electrical 
and electronic equipment. Disposal must be carried out in 
accordance with local environmental regulations for waste 
disposal. 
For more detailed information about treatment, recovery and 
recycling of this product, please contact your local authority. 

 

Use 

The hood is designed to be used either for exhausting or filter 
version. 

Ducting version

 

The hood is equipped with a top air outlet 

B

 for discharge of 

fumes to the outside (exhaust pipe and pipe fixing clamps not 
provided). 

Filter version

 

Should it not be possible to discharge cooking fumes and 
vapour to the outside, the hood can be used in the 

filter 

version

, fitting an activated carbon filter and the deflector 

on the support (bracket) 

G

, fumes and vapours are recycled 

through the top grille 

H

 by means of an exhaust pipe 

connected to the top air outlet 

B

 and the connection ring 

mounted on the deflector 

F

 (exhaust pipe and pipe fixing 

clamps not provided).   
The models with no suction motor only operate in ducting 
mode, and must be connected to an external suction device 
(not supplied). 
The connecting instructions are supplied with the peripheral 
suction unit.  

 

Installation 

The minimum distance between the supporting surface for the 
cooking vessels on the hob and the lowest part of the range 
hood must be not less than 50cm from electric cookers and 
65cm from gas or mixed cookers. 
If the instructions for installation for the gas hob specify a 
greater distance, this must be adhered to. 

 

  Electrical connection 

The mains power supply must correspond to the rating 
indicated on the plate situated inside the hood. If provided with 
a plug connect the hood to a socket in compliance with current 
regulations and positioned in an accessible area. If it not fitted 
with a plug (direct mains connection) or if the plug is not 
located in an accessible area apply a double pole switch in 
accordance with standards which assures the complete 

Summary of Contents for KSMD910X1

















Reviews: