Instructions for use
29
GHOST function
_______________________________________________________
When this product is turned off, only the
button remains
illuminated (at low brightness). If the
button is pressed, the
hood will be set to standby and all buttons will light up with a
brightness of 5%. When in standby, if a function is activated, the
relative button will light up with 100% brightness. If you press the
button, the hood returns to standby mode and all buttons will
light up with a brightness of 5%.
Filter alarm reset
_______________________________________________________
After 100 hours of hood operation, buttons
,
,
, will
start to flash to remind you to clean the filters. To reset this
warning, press the On/Off button for 5 seconds, the light of the
On/Off button will flash once to indicate that the filter time has
been reset.
24h air exchange function
_______________________________________________________
The 24h air exchange function allows you to clean the air in the
room. To start the 24 hour function, press and hold the
button
for 3 seconds. The extraction hood will run at minimum speed for 10
minutes every hour (up to a maximum of 24 hours). The
and
buttons will flash as long as the function is active. Briefly touching
any button (apart from the
button) will disable the function.
EN
Summary of Contents for KV194
