19 590 1670 02
3
2.
Plinth dismount
1) With a screwdriver, makes lever on the points
….
2) … indicated, with a movement from the bottom
to the upper …
3) in order to permit the plastic tooth, on the
plinth, to come out from the site
4) After the described operation on both sides,
proceed with the plinth dismount following the
order in picture.
5) For the assemblage of the plinth, follow the
order on the picture.
6) Finish the operation with a light pressare on
the points in picture. The “click” sound will
indicate that the plinth is assembled.
2
1
2
3
1
2
1
A
