EN
7
2. INSTALLATION INSTRUCTIONS
Important!
The appliance must be installed by a qualified engineer in compliance
with the relevant regulations.
The washing machine is heavy. Take care when lifting it.
2.1 UNPACKING
The unit on flexible mounts is fixed in place for transport using the screws (
A)
on the rear of the washing machine with the relative plastic spacers
(B)
. Once
the screws have been removed, the power supply lead can be used.
1. Undo
all
the screws with a 10 mm spanner.
2. Remove
all
the screws (
A)
from the rear
3. Remove
all
the plastic spacers
(B)
4.
Fit
all
the plastic plugs
(C)
provided, to pre-
vent water splashes from getting into the appli-
ance, and contact with live parts.
A+B
A
B
C