EN
6
If the appliance is provided with a plugless supply cord:
It is necessary to install in the fixed wiring an all-pole disconnection de-
vice having a gap between contacts of at least 3,5mm. After installation
the disconnection device has to be easy to reach.
The connection to the mains must be carried out by a qualified technician
in accordance to the scheme shown below and the regulations in force
L
= brown
N
= blue
= yellow-green
In the event of damage to the supply cord, it has to be replaced by the
manufacturer or an authorized technical service center in order to avoid
any risk.
Important!
This appliance is easy to use.
However, for the best results it is important to read this manual carefully and
follow all the instructions before putting it into operation.
The manual provides the correct instructions for installation, use and mainte-
nance, as well as giving useful advice.
The manufacturer declines all responsibility
for injury or damage caused
by failure to comply with the above regulations or deriving from tampering
with even just one part of the appliance and the use of non-original spare
parts.