background image

EN - 17

EN - 17

5.7 Auxiliary Functions 

Before starting the program, 

you can select auxiliary functions if you 

wish so.

• Press the key of the auxiliary function you 

want to select.

• If the symbol of the auxiliary function is 

continuously on in the electronic display, the 

selected auxiliary function will be enabled.

• If the symbol of the auxiliary function

is flashing in the electronic display, the 

selected auxiliary function will not be 

enabled.

Reason for not enabling the function:

• 

That auxiliary function might not be 

available for the selected washing 

program.

• 

The machine might have passed the 

step where that auxiliary function could 

be applied.

• 

The auxiliary function might be 

incompatible with another auxiliary 

function you have previously selected.

 

1.  Delayed start auxiliary function  

You can use this auxiliary function to delay 

the start time of the washing cycle for 1 to 

23 hours.

To use the delay function:

• 

Press the delay key once.

• 

“1h” will be displayed. 

 will turn on in 

the electronic display.

• 

Press the delay key until you reach the 

time after which you want the machine 

to start the washing cycle.

• 

If you have skipped the delay time you 

would like to set, you can keep pressing 

the delay key until you reach that time 

again.

• 

To use the time delay function, you need 

to press the Start/Pause key to start the 

machine.

Note

: After selecting the delay function, 

you can select other functions without 

touching the “Start/Pause” key, and then 

you can touch the “Start/Pause” key to 

enable time delay.

To cancel the delay function:

• 

If you did not press the Start/Pause key, 

keep touching the delay key until the 

electronic display shows the duration 

of the program you have selected. 

Once you see the program time on the 

electronic display, this means that the 

delay has been cancelled. 

• 

If you have pressed the Start/Pause key 

to start the machine, you just need to 

touch the delay key once.     will go off 

on the electronic display, press “Start/

Pause” key to start the washing cycle.

2.  Selecting the level of soiling

You can wash your laundries in shorter 

or longer durations, at lower or higher 

temperatures by selecting a soiling level 

depending on the soiling level on your 

laundries.

Soiling levels are automatically set in some 

programs. You can make changes at your 

discretion.

Note

: If there are no changes in the 

level when you touch the soiling level key, it 

means there is no soiling level selection in 

the program you have selected.

Summary of Contents for LBP3T94PIT



































Reviews: