background image

11

11

Function Selection

Additional functions selectable accord-

ing to selected program can be selected 

by pressing related key. Led of selected 

function will be on.

If not selected together some additional 

functions go off when it is not selected 

with other one. For example; when using 

cotton program, quick wash and rinse 

plus auxillary functions can not be se-

lected together. After selecting quick wash 

program, if rinse plus key is pressed fast 

program will be on and quick wash func-

tion led will go off.

Auxiliary Functions

Quick wash

Shortens washing time for lightly soiled 

fabrics.  This function can be used for 

cotton and synthetic programs for tem-

peratures below 60°C. 

Rinse Plus

You can increase the number of the cur-

rent rinsing cycles by using this function. 

Thus, the risk of the sensitive skins get 

effected by the detergent remaining on 

the laundry is reduced.

Anti-Creasing

To avoid wrinkling of your clothes, select 

this function. When Anti-Creasing is 

choosen please load less cloth, this way 

a special washing and spinning profile 

will reduce the wrinkles and your clothes 

will be easy to iron.

Spin speed selection knob 

You can spin the laundry up to 800 cycle 

/ min. with the models having cycle se-

lection button. Your machine will spin not 

more than 800 cycle / min. for synthetic 

programs and 600-400 cycle/min. for 

woollen programs. In addition if you do 

not want to spin your laundry you may 

choose “No Spin” position.

Program Progress

After machine starts operation relevant 

program led on program progress display 

will be on. When a step is completed that 

step’s led is off and next step’s led is on. 

When program is completed “Door” led 

will be on again. 

During machine operation you can press 

“Start/Pause/Cancel” key for getting 

machine to “Pause” position. In this case 

“Start/Pause/Cancel” led will blink. 

Changing Program

You can use this feature for washing 

laundry in the same textile group for 

washing at lower or higher tempera-

tures. For example, instead of Cotton60, 

Child-proof lock

During washing laundry in order to 

maintain that program progress is not af-

fected by pressing keys by children there 

is child-proof lock. To enable child-proof 

lock, after washing begins, press Quick 

wash and Rinse Plus function buttons 

together simultaneously for three sec-

onds. Pre-wash additional function led 

will always blink. 

After program ends in order to start a 

new program or alter the program you 

have to disable child-proof lock. To do 

this press same buttons for three sec-

onds and Child-proof lock led will be off.

Summary of Contents for LBS 845















Reviews: