Smeg LBS 845, User Manual

12

12

Adding laundry

If you want to add laundry to your 

machine after program begins press 

Start/Pause key for switching machine to 

pause mode. If water level in the machine 

is appropriate “door” led on program 

progress display is on and laundry can 

be added to the machine. If “door” led is 

not on after one minute than water level 

in the machine is not appropriate and 

laundry can not be added. You can press 

“Start/Pause/Cancel” key for continuing 

program. 

Cancelling a program

For canceling a program “Start/Pause/

Cancel”  key is pressed for three sec-

onds. After this period “Start/Pause/Can-

cel”  and all other leds will be off .You can 

select a new program and start washing.

If cancel task is performed during wash-

ing “Spin” led on display will light on, ma-

chine will pump and when “Spin” led is off 

“door” led will be on, door can be opened 

and new program can be selected. 

After machine starts operation even if 

spin speed or washing temperature is 

changed, initial speed and temperature 

is valid. In order to change spin speed or 

temperature after pressing “Start/Pause/

Cancel”  new cycle or temperature can 

be selected. 

End of the Program

When program ends “ door” led will light 

on and door can be opened and machine 

is ready for next washing. Press “On/Off” 

for turning machine off. 

Cotton40 can be used. For selecting 

Cotton40 instead of Cotton60 by press-

ing “Start/Pause/Cancel” key machine 

is switched to pause position. Program 

knob is turned for selecting Cotton40 

program. 

Even when the program selection knob 

is changed during the program initially 

selected program will be executed. For 

changing washing program continuing 

program must be cancelled. 

Although selected auxillary functions 

must be compatible with washing pro-

gram.

Time delay for program start

Using time delay key you can delay the 

starting of the selected program for 3 

hours, 6 hours or 9 hours. 

When time delay key is pressed once 

3hours delay is adjusted and led will 

light on. If same key is pressed once 

more delay is 6hours, and if it is pressed 

once more 9 hours delay is selected. If 

time delay key is pressed again delay 

is cancelled. After the selection of time 

delay when “Start/Pause/Cancel” is 

pressed program can be started with 

delay. During delay period door can be 

opened or laundry can be added 

After time delay is initiated by pressing 

“Start/Pause/Cancel” you can switch 

machine to “Pause” mode and change 

delay time. 

Emptying Laundry 

After program ends machine automati-

cally stops. Turn off tap water. Pull the 

handle and open loading door. Turn off 

your machine by pressing “On/Off”. After 

taking laundry out keep the loading door 

open and let the drum ventilate. Check 

the bellow and clean.