Cleaning and maintenance
45
EN
3. Turn the
Select knob
until the
Pyrolytic
function is selected.
The duration of the
Pyrolytic cycle
appears
on the display (factory set to
2 hours
).
4. Turn the
Select knob
to set the
duration of the Pyrolytic cycle from a
minimum of
2 hours
to maximum of
3 hours
.
5. Press the
Select knob
to confirm the
parameters.
6. Wait 3 seconds before starting the
function.
Pyrolytic cycle
7. Approximately 2 minutes after the
Pyrolytic cycle
starts, the
Door lock
indicator light
comes on to indicate
that the door is locked by a device that
prevents it from being opened.
8. At the end of the
Pyrolytic cycle
,
flashes on the display and a
buzzer will sound that can be
deactivated by opening the door or
pressing/turning one of the two knobs.
9. Wait for the oven to cool down (the
Door lock indicator light
turns off).
10.Collect any residues that may have
been deposited inside the oven cavity
using a damp microfibre cloth.
11.Turn the
Function knob
to
0
to exit
from the function.
Recommended pyrolytic cycle
duration:
• Light dirt:
L01 - 02:00
.
• Medium dirt:
L02 - 02:30
.
• Heavy dirt:
L03 - 03:00
.
It is not possible to select any
function once the door lock device
has been activated.
The door remains locked until the
temperature inside the oven returns
to a safe level.
