User instructions
17
OPTIONS
(available in all programs except the soak program)
The options are controlled by the
OPTION
SELECTION
button
(3)
.
Press the button to access the procedure,
confirmed by flashing of one of the
OPTIONS
lights
(E).
N.B.:
The
PROGRAM DELAY light
only comes on when the specific
PROGRAM DELAY
button
(5)
is pressed.
Press the
SELECT OPTIONS
button
(5)
again to display the next option. To
confirm an option, press the
CONFIRM OPTION button
(6)
(the light stops
flashing and remains on). This operation can be carried out for one or all of
the options available. To deactivate an option which has already been
confirmed, press the
OPTION SELECTION
button
(3)
until the
OPTION
LIGHT
required flashes, and press the
CONFIRM OPTION
button
(6)
. The
light stops flashing and goes out.
All options
except "3in1"
are
disabled
at the end of the wash cycle.
QUICK TIME PROGRAMS
Select this option together with any washing program (except the soak
program) to
SHORTEN
the cycle. To activate this option, press button
(light comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
HYCLEAN
Increases the temperature of the final hot rinse to
70°C
to ensure a further
reduction in the bacteria level. If the temperature in the tank falls during
this stage of the program (e.g. because the door is opened or due to a
power blackout), the light of the option and the program lights flash to warn
that the additional washing phase has not been completed successfully.
This does not mean that the wash program has been less effective than
usual.
