Smeg Oven SC110, Instruction Manual

41

Instructions for the User

7.5

Programmed cooking procedures

7.5.1

Cooking with minute minder

From ON status (see point “7.2 Operating modes”), press PT1 once. The
display will show the 

 figures (constantly on) and the 

 symbol

(flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A
few seconds after the required duration is set, the 

 symbol will stop

flashing, and the countdown will start from that moment. Now select the
cooking function required and wait for the buzzer to sound, indicating that
the cooking time is over.
When cooking is over, to stop the buzzer and halt cooking, press PT2
once to switch the oven to OFF status.

The minute minder also works with no function set.

Warning: the minute minder does not stop the cooking process. It only
warns the user that the preset number of minutes have passed.
To switch the oven off, press PT2.

Modifying the data set
Once the countdown has started, its duration can be changed while
cooking is in progress. 
When the 

 symbol is steady and cooking is in progress, press PT1

once. The 

 symbol starts flashing and PT1 can be turned to change the

set duration. A few seconds after the last change, the 

 symbol will stop

flashing, and the countdown will restart from the new value.
To change the preset temperature, wait for the 

 symbol to become

steady and turn PT1 to the right or left to increase or decrease the cooking
temperature.

7.5.2

Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to
be started and then ended after a specific length of time set by the user.

Select a cooking function (see point “7.4 Selecting the function”) and press
PT1 twice. The display will show the 

 figures and the 

 symbol

(flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59). A few seconds after the required duration is set, the 

 symbol will

stop flashing, and semiautomatic cooking will start from that moment. At
the end, the word STOP will appear on DSP1, cooking will stop and a
buzzer will sound; press PT1 to deactivate it.