5
INSTALLATION
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or non-
flammable material with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 60~75cm above the cooking
hob surface for best effect. See pic 1.
3. Drill a hole in the cupboard, with hole wide 570*265(mm) for 60cm model and hole
wide 865*265(mm) for 90cm model. See pic 2. Make sure the distance between
the edge of the hole and the edge of the cupboard edge is at least 35mm.
4. Take off the aluminium filter and push the hood into the cupboard. Then use a
screwdriver to secure the snap screws and fix the hood body to the cupboard. See
pic 3
5. Fix the expansion pipe to the outlet with a cable tie and lead it to outside.
Then
Install
aluminum filter. See pic 4. Note: The expansion pipe is not included in the product.
