Instructions for the User
20
Cooking start:
as well as setting a cooking duration, the cooking start time can
also be set (with a maximum delay of 12 hours in relation to the current time). To
set the cooking start/end time, proceed as follows:
• Set the cooking duration as described in the previous point;
• Within 6/7 seconds of the last pressure on
or
, press
again to set
the cooking start time. The current time will appear on the display with
internal segments illuminated to show the end of cooking time. Use
and
to set the cooking start time;
• 6/7 seconds after the last key is pressed, the display will show the current
time and the cooking start and end times, which will be represented by the
illuminated inside segments. The display segments will be constantly
illuminated as long as the current time is not the same as the cooking start
time; as soon as the current time reaches the set starting time, all the inside
segments will start to flash, indicating that the oven has started cooking.
• At the end of the cooking time, the timer will switch the oven heating
elements off, the buzzer will start to sound and the numbers on the dial will
flash;
• To reset the whole set program, keep the central key
pressed for 1 or 2
seconds: if cooking has already started, the oven will have to be switched off
manually;
• Here we can see a programming example: the current time is 7:06 and
cooking is programmed to start at 8:00 and end at 9:00;
• At 8:00, the inside segments between 8 and
9 will start to flash, while the hour hand will
remain still;
• Warning: for the oven to start cooking
operations after the programming
procedures described above, the thermostat
and function selector knob must be correctly
set to the desired temperature and function.
Warning: for the oven to start cooking operations after the programming
procedures described above, the thermostat and function selector knob
must be correctly set to the desired temperature and function.
