Cleaning and maintenance
74
7. Press the symbol
to start filling the
reservoir with the solution.
8. When finished, shake the tube in order to
remove any remaining water.
9. Return the tube to its original position,
remove the mixture container and close
the door.
10. When the reservoir is full, the display
will indicate the time remaining to the
end of the cleaning cycle.
At the end of the process, a buzzer will
sound and the display will show a request
to remove the liquid.
The appliance automatically fills
up the reservoir with the correct
amount of mixture.
If water remains in the reservoir for
longer than 24 hours, a message
appears on the display requesting
you to drain the reservoir.
When the door is closed, an
automatic system will automatically
draw up any residual water in the
tube to avoid drips.
