6. MAINTENANCE
1
．
The rangehood and its filter mesh should be cleaned regularly in order to
keep in good working order. Because the grease filters are made of metal,
do not clean the filters with detergents that will corrode metal products.
Clean the filters as below:
Method one:
Put the filter in water (40
℃
-50
℃
), pour in some grease-loosening
detergent, soak it for about 2-3 minutes and then clean it with a soft
brush. Do not brush too hard, as it may damage the filter.
Method two:
You can also put the filter into the dishwasher with detergent for cleaning.
Set the temperature at around 60
℃
.
2. To protect the main body from corrosion over a long period of time, the
rangehood should be cleaned with hot water plus soap or non corrosive
detergent once a week. Do not use grinding detergent, or it will damage the
body.
3. Keep the motor and other spare parts free from water, as this will cause
damage to the appliance.
4. Disassembly and assembly the filter:
7. ATTENTION
·
Rangehood uses 220-240V 50Hz power;
·
Disconnect the power when you clean the rangehood;
·
Do not detach the filter surround
·
If the power cord or plug is damaged, contact service centre
6
