Instructions for the installer
18
Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case
of operation from a
220-240V
power supply, with a three-core plug. Make sure that plug and wall socket
are of the same type and are in conformity with regulations in force. Make sure that the appliance is
properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters
or shunters.
The manufacturer declines all responsibility
for damage to persons or things caused by non-
observance of the above prescriptions.
13.2 Wall fixing
• Stretch out the chain attached to the cooker
horizontally so that the other end touches the wall.
• Mark the wall in the position where the hole is to be
drilled.
• Drill the hole, insert the finned dowels and attach the
chain.
• Move the cooker up against the wall.
13.3 Mounting the rear top skirtboard (where applicable)
• Loosen
nuts
B
.
• Position the skirt above the top, taking care to align
pins
C
with holes
D
.
• Secure the skirt to the top by tightening screws
A
.
914772410/ B
