Use
9
ITENEN
3 Use
3.1 Before first use
1. Remove all stickers and labels and clean
the outside of the toaster using a damp
cloth.
2. Use the toaster for the first time without
slices of bread in it.
3. Turn the two Browning controls to the
maximum position and lower the two
breadlifts. This will burn off any dust that
has fallen into the toaster during
production or transport.
Electrocution hazard
• Insert the plug into an earthed three-pin
power outlet.
• Do not remove the earth pin.
• Do not use an adapter.
• Do not use an extension cable.
• Failure to follow these instructions can
cause fires, electric shocks or even
death.
When using the appliance for the
first time you may notice some
smoke and an unpleasant smell.
Tips and suggestions
• The first cycle allows the heating
elements to reach the correct
temperature for toasting. The following
cycles may take less time to toast the
slices of bread.
• The type of bread used affects the
toasting time. The fresher the bread, the
longer it takes to toast it. Different types
of bread and different moisture contents
may require different browning levels.
For best results:
• Toast only one type of bread at a time.
• Toast bread slices of the same thickness.
• Use bread slices no thicker than 30 mm.
• If you are using handcut bread please
try to cut slices as evenly as possible.
Uneven slices will toast unevenly.
• Do not use slices of bread that are very
thin or broken as they may burn.
smeg-tr.com
