background image

Use

27

EN

Option 

U4

 modifies the brightness of the 

display. 10 levels can be selected.
•  

0

: maximum brightness.

•  

9

: minimum brightness.

Option 

U5

 allows you to display the 

countdown of the minute minder timer and 
timed cooking in seconds, from 59 to 0 
seconds.

•  

0

: animation off.

•  

1

: animation on.

Option 

U6

 allows you to activate or 

deactivate the automatic pan detection 
function. (see “Switching on the cooking 
zone automatically”).
•  

0

: automatic detection off.

•  

1

: automatic detection on.

Option 

U7

 specifies the length of the alarm 

when the timer has finished. 3 levels can be 
selected:
•  

0

: alarm duration 120 seconds.

•  

1

: alarm duration 10 seconds.

•  

2

: alarm disabled.

Exiting the user menu

There are two ways to exit from the user 
menu:

1. Press the 

 button. Any modifications 

will be discarded and the hob will be 
switched off.

Or

2. Press and hold the On/Off 

 button 

for at least 2 seconds. The modifications 
will be saved and the hob will be 
switched off.

3.7 Error codes

If the appliance malfunctions or operates 
incorrectly, the associated error code 
appears on the cooking zones display.
The error codes always begin with “

E

..” or 

Er

..”, followed by a number.

The following error codes can be corrected 
without having to contact the Technical 
Support Service.
•  

Er03

: Remove any materials or pans 

from the area of the front control panel.

•  

E2

: Make sure that the pans are suitable 

for induction cooking and that they are 
not empty; allow the appliance to cool 
down.

For all other errors, make a note of the 
code, if possible, and contact Technical 
Support.

The seconds count is displayed 
when the timer is set for less than 
10 minutes.

If automatic pan detection is 
disabled, the area must be 
switched on manually when a pan 
is placed on the hob.

If these error codes appear 
frequently, contact Technical 
Support. 

Summary of Contents for Universale SAI3643B

































Reviews: