Installation
31
EN
Testing
At the end of installation, carry out a brief
inspection test. If the hob fails to operate,
after checking that you have carried out the
instructions correctly, unplug the appliance
and contact Technical Support.
5.2 Instructions for the installer
• Do not bend or trap the power cable.
• The appliance must be installed
according to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
5.3 Power limitation procedure (only
for the installer)
In order to change the maximum power
draw of the appliance, it is necessary to
access the user menu (see “User menu”).
Once you enter the user menu, the first
option available is the one marked with the
code
U0
(see “User menu options table”).
1. The cooking zone display will show, at
the top, the symbol
alternating with
the number
.
2. The timer display instead shows the
factory set power (depending on the
model - values expressed in Kw):
3. Press the left of the scroll bar to decrease
the power and the right to increase it.
Thanks to the
Eco-Logic Advance
function,
the power value increases and decreases
in 0.1 Kw steps with each touch.
To exit the user menu you can:
1. Press
for at least 2 seconds to save
the changes.
2. Press
to discard the changes.
In both cases the hob will be turned off and
will need to be turned on again.
Table of power draws
5.4 Safety instructions
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (
>90°C
), otherwise they might
warp over time.The minimum clearance
between exhaust hoods and the cooking
surface must be at least the distance
indicated in the exhaust hood installation
instructions.The minimum clearances must
also be respected for the edges of the hob
on the back as indicated in the mounting
illustrations.
Model
Minimum
power (kW)
Maximum
power (kW)
60 cm
2,4
7,4
Heat production during appliance
operation
Risk of fire
• Check that the carcase material is heat
resistant.
• Check that the carcase has the required
openings.
• Do not obstruct the ventilation grille in
front of the product during mounting.
