Instructions for Use
44
Trouble-shooting Guide
During the service, the user come across troubles
appearing during the operation of the appliance.
We are listing some of troubles, which in most
cases result from improper handling of the
appliance and can be eliminated by yourself.
Trouble
Cause
Trouble-shooting
The appliance is connected
No electricity in the wall socket.
to power supply, but won’t
work
The appliance is not switched on.
Switch it on (green light is on)
The thermostat knob was set
under
min (1)
. position (towards
left) and the appliance was
switched off.
Turn the knob to the right.
The appliance operates
The lid was opened for too long.
continuously.
Thermostat knob is on too cold
position.
Set the knob towards
min (1)
position.
Insufficiently cooled condenser.
Remove the dust from the condenser and
check if theres is adequate air circulation
behind the appliance.
The switch is in position for discontinuous operation (yellow light is on).
Vibrations or too much noise.
Inadequate position.
Take care for suitable pavement.
Appliance in direct contact with
wall or next units.
Move the freezer away.
Outer surfaces are wet.
Wet room.
Put the appliance in dry room.
Badly isolated floor.
Displace the appliance.
Longer period of hot and humid weather.
Excessive formation of frost.
The lid of the appliance opens too frequently or the lid is left open too long.
There is stored too big quantity of insufficiently cooled down foods.
Lid does not shut well.
Check if two styrofoam elements are
removed and if packs eventually prevent
the lid to be closed.
Red light is on.
The appliance has not reached the set temperature.
Too big quantity of insufficiently cooled down foods raises the inside
temperature. As soon as the foods cool down to set temperature the light goes
off.
Interior Light Bulb Replacement
Before you replace the light bulb, disconnect the
appliance from the mains.
Remove the plastic lid and replace the burnt out
bulb with a new one (E14, 15 W).
Do not throw the bulb among organic garbage.
Light bulbs belong to durables therefore
our in-guarantee service does not relate to it.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WHICH DO NOT
INFLUENCE ON THE APPLIANCE OPERATION.
