Original Standers
9
5.5 PELVIC HARNESS
The pelvic harness can be adjusted
for height, depth and angle.
5.5.1 HEIGHT
•
Loosen the lever lock (I) on each
main support leg.
•
Slide the pelvic harness assembly
to the desired height
•
Re-tighten the lever locks (I)
5.5.2 DEPTH AND ANGLE
•
Loosen the handwheels (J) on each side of the pelvic harness assembly.
•
The assembly depth can now be adjusted backward or forward
•
By twisting the assembly, the angle can be adjusted.
•
When the desired depth/angle has been set, re-tighten the handwheels (J)
5.6 LATERAL SUPPORT
The lateral support can be adjusted
for height, depth and angle.
5.6.1 HEIGHT
•
Loosen the lever lock (K) on each
main support leg.
•
Slide the lateral support assembly
to the desired height
•
Re-tighten the lever locks (K)
5.6.2 DEPTH AND ANGLE
•
Loosen the handwheels (L) on each side of the lateral support assembly.
•
The assembly depth can now be adjusted backward or forward
•
By twisting the assembly, the angle can be adjusted.
•
When the desired depth/angle has been set, re-tighten the handwheels (L)
5.6.3 WIDTH
•
To adjust the width (pitch) of the lateral support, simply loosen the handwheels at
the rear of the lateral support and slide to the desired position.
•
The amount of adjustment is limited by the slot
•
Re-tighten each handwheel when finished.
5.7 ACTIVITY BOWL
•
When required the bowl fits in the tray. When not in use, the tray infill can be
used.
I
J
K
L
Summary of Contents for Independent
