COSMOS 302X series servo drives / inverters
Installation, use and maintenance manual - EN
Ver. 1.01
17
5 Installation and start-up
5.1 Preliminary operations
• Verify the perfect integrity of the equipment and its components.
• Make sure the installation manual is present.
5.2
Positioning and installation
The device must be duly tightened to the metal wall of the electrical panel, by means of two screws M5 x 0.8
mm; if the operation generates vibrations, use retention washers (Grover or Belleville) or a thread-lock com-
pound. The following picture shows the front view and the recommended hole pattern.
The servo-drives/inverters of the COSMOS 302X series are designed for operating in
closed electrical operating areas
(as defined in the IEC 61800-5-1:2009-04 Standard); in-
stallation outside an electrical panel is not allowed.