4
Control Panel Lock
Your wine cooler comes equipped with a security feature that prevents someone from accidentally
changing the temperature of your wine cooler. This control panel lock feature will activate
automatically when the control panel is left un-touched for 12 seconds. To unlock your wine
cooler simply hold the up and down arrows simultaneously for 5 seconds. The control panel will
emit an audible beep noise and the control panels buttons will be active.
How to maintain your cooler
While your new wine or beverage cooler is mostly maintenance free, we recommend the following
to keep it looking clean and working properly.
Turn off the power, unplug the appliance and remove all items including all shelves.
Wash the inside surfaces with a solution of warm water and baking soda (approximately 2
tablespoons of baking soda for each quart of water.)
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any
electrical parts.
Wash the exterior with warm water and mild liquid detergent. Rinse well and dry with a
clean soft cloth.
Vacuum the front grill and back of the unit twice per year. Unplug the beverage cooler before
cleaning.
It is recommended to clean the unit completely inside and out once a year to maximize the
longevity of the wine or beverage cooler.
Power Loss
Power failures that are corrected within a few hours should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going
to be off for a longer period of time, you need to take other measures to protect your
contents.
If the unit is unplugged, loses power, or is turned off, you must
wait 3 to 5 minutes before
restarting
. Attempting to restart the wine cellar before this time has elapsed may prevent
the wine cellar from starting.
Moving Your Appliance
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Turn the adjustable leg up to the base to avoid damage.
Tape the door shut.
Be sure the appliance stays secure in the upright position during transportation. If your
appliance is moved on an incline greater than 30 degrees, you may upset the balance in your
compressor and cause damage. Do not do this. Also protect the outside of the appliance
with a blanket or similar items.
