Page 3
ASSEMBLY INSTRUCTIONS
Assemble Hose To Tank
1. Wrap teflon tape around tank fitting threads 2X in
clockwise direction, if needed.
2. Align hose and screw on to tank.
(See Figure A)
.
3. Tighten with a 5/8” wrench.
(See Figure B)
.
Figure B
Figure A
Assemble Hose, Extension, Shut-Off & Nozzle
1. Attach hose to shut-off and tighten securely using a 9/16” wrench. Do not overtighten. Use a 3/4” wrench
to hold the shut-off handle while tightening the hose.
(See Figure C)
2. Install the extension onto the shut-off assembly and tighten the nut securely using a 13/16” wrench.
(See Figure C)
3. Install selected nozzle into the extension nut and tighten nut securely using a 13/16” wrench.
(See Figure C)
80°
FAN
.07 GPM #4 GREEN
80°
80°
80°
80°
SPRAY
ANGLE:
SPRAY
PATTERN:
FAN
FAN
FAN
FAN
FLOW
RATE:
.10 GPM
.13 GPM
.10 GPM
.20 GPM
COLOR
#6 RED
#10 BLACK
#8 GRAY
#12 BROWN
65°
FAN
.2 GPM
80°
80°
80°
95°
SPRAY
ANGLE:
SPRAY
PATTERN:
FAN
FAN
FAN
FAN
FLOW
RATE:
.2 GPM
.5 GPM
.4 GPM
.5 GPM
110°
FAN
1 GPM
BRASS FLAT FAN TIP
NOZZLE USES:
CERAMIC CONEJET TIP
NOZZLE USES:
1. Industrial and Concrete Series (Orange)
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Concrete Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
Used on
BRASS ADJUSTABLE
FAN NOZZLE USES:
1. Industrial and Concrete Series (Orange)
Used on
Figure C
HOSE
SHUT-OFF
EXTENSION
NUT
NOZZLE
