6
Maintenance
SET UP
HYDRAULIC HOSE KIT
If you purchased a Aer8-003 Hose Kit with your base Aer-8 Aerator it will come un-installed.
Quick Couplers from hose to tow vehicle are not included.
1. You will have to supply your
own quick couplers to
attach hydraulic hoses to
your tow vehicle.
2. Hydraulic fittings and hoses
should be attached to the
cylinder. If not, connect one
end of hoses to the cylinder.
3. Route the hoses through
the trough below the ballast
tank, secure in the hose
clamp on the top of the
tongue.
4. Connect opposite end to the
tow vehicle with quick
couplers (not provided).
ROLLER ADJUSTMENT
To adjust the down pressure on the roller, remove the hitch pin and rotate the roller assembly down to the next
notch. There are 4 adjustment notches to accom-
modate the type of down pressure you want.
Summary of Contents for AER 8 Series
