![background image](http://html1.mh-extra.com/html/smithco/aer60-110/aer60-110_parts-and-service-operators_1305882010.webp)
8
Maintenance
OPERATION
In excessive stony conditions reduce operating speed.
1. Attach Aer-8 to tow vehicle.
2. Fill ballast tank.
3. Check for any leaks before heading to
turf.
4. Lower Aer-8 into the ground so tine
penetrate the soil to desired depth.
5. Drive the tow vehicle at speeds that are
safe.
6.
Do Not
make sharp turns with the
tines in the ground. Lift Aer-8 out of the
ground when making sharp turns.
7. Compacted areas may have to be aer
-
ated more than once.
8. When Aer-8 is not in use, remove jack
pins, extend legs to maximum exten
-
sion, replace jack pins.
CYLINDER LOCKOUT BAR
There is a cylinder lockout attached to the rear pivot arm. This is a security guard used when the cylinder
needs to be extended for a long period of time, such as for maintenance. Placed over the cylinder rod when it
is fully extended and pin in place. When not in use return to rear pivot arm for storage.
Summary of Contents for AER60-110
