Smithco Sprayer Star 3180 SmarTrax MD Installation Manual Download | Manualshive

Page: 8 / 30

background image

Chapter 2

4

Smithco Spray Star 3180 SmarTrax™ MD Installation Manual

Preparing for Installation

Before installing the SmarTrax MD system, park the machine where the ground is level, clean, and dry. Turn off
the machine and leave it turned off for the duration of the installation process.

During the installation process, follow good safety practices. Be sure to carefully read the instructions in this
manual as you complete the installation process.

Recommendations

Raven Industries recommends the following best practices when installing or operating the SmarTrax MD
system for the first time, at the start of the season, or when moving the SmarTrax MD system to another
machine:

•

Use part numbers to identify the parts.

•

Do not remove the plastic wrap from a part until it is necessary for installation.

•

Do not remove plastic caps from a part until it is necessary for installation.

Point of Reference

The instructions in this manual assume that you are standing behind the machine, looking toward the cab.

Updates

Software and manual updates are available on the Raven Applied Technology website:

http://www.ravenhelp.com

At Raven Industries, we strive to make your experience with our products as rewarding as

possible. One way to improve this experience is to provide us with feedback on this manual.

Your feedback will help shape the future of our product documentation and the overall service

we provide. We appreciate the opportunity to see ourselves as our customers see us and are

eager to gather ideas on how we have been helping or how we can do better.

To serve you best, please send an email with the following information to

techwriting@ravenind.com

-Smithco Spray Star 3180 SmarTrax™ MD Installation Manual

-Manual No. 016-9002-003 Rev. A

-Any comments or feedback (include chapter or page numbers if applicable).

-Let us know how long have you been using this or other Raven products.

We will not share your email or any information you provide with anyone else. Your feedback

is valued and extremely important to us.

Thank you for your time.

«
...
6
7
8
9
10
...
»

Summary of Contents for Sprayer Star 3180 SmarTrax MD































Reviews:

No comments

Related manuals for Sprayer Star 3180 SmarTrax MD

Brand: Parkside Pages: 47

Brand: BERG Pages: 52

Brand: Dramm Pages: 25

PowrTwin 6900 Plus

Brand: Speeflo Pages: 36

Brand: Fuji Spray Pages: 24

Brand: SAMES KREMLIN Pages: 55

Brand: BGS technic Pages: 3

Brand: Fimco Pages: 8

Brand: Fimco Pages: 8

Brand: WAGNER Pages: 30

Brand: WAGNER Pages: 38

Brand: WAGNER Pages: 38

Brand: WAGNER Pages: 40

Brand: DeVilbiss Pages: 12

Brand: Annovi Reverberi Pages: 44

Brand: Sam Pages: 73

Brand: 3D Systems Pages: 10

Brand: Intex Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands