background image

24

EC Declaration of Conformity

according to Directive 89/392/EEC

We

                                                            S MITHCO    INC.                                                                          

(Name of supplier)

                              3 4   We s t   Av e .       Way n e ,   PA    1 9 0 8 7     US A                                 

(Full address of the manufacture - authorized representative established in the Community must
also give the business name and address of the manufacture)

declare under our sole responsibility, that the product

(Make, Model)

to which this declaration relates corresponds to the relevant basic safety and health
requirements of the Directive 89/392/EEC,

(if applicable)

and to the requirements of the other Directives:

EN292-1
EN292-2
EN294
EN349
92/59
89/392

(Title and/or number and date of issue of the other Directives)

(if applicable)

For the relevant implementation of the safety and health requirements mentioned in the
Directives, the following standard(s) and/or technical specification(s) has (have) been respected:

ISO 37-1983
PREN 836
ISO 1219-1976
SAE HS-2800
SAE J1362

(Title and/or number and date of issue of standard(s) and/or technical specification(s))

Cameron, Wisconsin  USA

            

                    

(Place and date of issue)

(Name, function and signature  of the authorized person)

Gas Super Rake 13-550-D/13-551-D
Diesel Super Rake 17-001-E
Super Star 42-000-E/42-001-D
Diesel Super Star 43-100-A
Super Star X-Treme 43-000-A
Diesel Super Star X-treme 43-001-A

Summary of Contents for SUPER RAKE 13-550-D





























Reviews: