14
Introduction
PARTS MANUALS AVAILABLE ONLINE AT www.smithco.com
SERVICE CHART SUPER STAR FX
Before servicing or making adjustments to the machine, stop engine, set park break, block
wheels and remove key from ignition.
Follow all procedures and ONLY use parts prescribed by the manufacturer. Read the engine
manual before maintenance.
The suggested maintenance checklist is not offered as a replacement for the manufacturer’s engine manual but
as a supplement. You must adhere to the guidelines established by the manufacturer for warranty coverage. In
adverse conditions such as dirt, mud or extreme temperatures, maintenance should be more frequent.
Maintenance Service Interval
Maintenance Procedure
Torque the wheel lug nuts. (64-74 ft/lb (87-100 Nm))
Change the engine oil filter.
Check the engine oil level.
Clean area around muffler and controls.
Check the hydraulic fluid level.
Check the tire pressure.
Check condition of hydraulic hoses and fittings.
Inspect and clean the machine.
After the first 50 hours
Change Hydraulic Oil Filter.
Clean or change air filter.
1
Clean pre-cleaner.
1
Change engine oil and filter.
Replace spark plug .
Lubricate machine.
Clean or change remote air cleaner.
Check the battery fluid level and cable connections..
Check muffler and spark arrestor.
Check belt tension .
Check engine valve clearance and adjust if necessary.
Check idle speed.
Clean battery terminals.
Change hydrauilic oil filter.
Torque the wheel lug nuts. (64-74 ft/lb (87-100 Nm))
Change fuel filter.
Change hydrauilic oil and filter.
Clean oil cooler fins.
1
Clean air cooling system.
1
Check safety filter in remote air cleaner.
After the first 8 operating hours
Before each use daily
Every 100 hours
Every 250 hours
Every 500 hours or yearly
1
In dusty conditions or when airborne debris is present, clean more often.