manualshive.com logo in svg

Smiths Kelvin Hughes Nucleus 3 5000 Series, System Handbook

The Smiths Kelvin Hughes Nucleus 3 5000 Series is an advanced navigation system. Ensure smooth operation with the comprehensive System Handbook available for free download. Access the manual from 88.208.23.73:8080 to learn more about this cutting-edge product's features and optimal usage, hassle-free.

Share
Download
background image

LA BELS

31

To enable the LABELS facility:

(1) Highlight the LABELS box and operate any

pushbutton. The box outline highlights in red - the
LABELS facility is enabled. To disable this facility
position the cursor over the LABELS box and
operate any pushbutton.  Target labels are
numbered 1 to the maximum target capacity. The
numbers of deleted or lost targets are not used
until the maximum number is reached.

(2) Selection of Labels ON identifies the target labels.

(3) To leave the Plot menu, position the cursor in the

END box and press any pushbutton.

TARGET TOTE

32

This shows varied information on multiple targets:
Range/bearing (BRG), speed, course (CRSE), TCPA

(Time to Closest Point of Approach) CPA (Closest Point of
Approach) and BCT (Bow Crossing Time) BCR (Bow
Crossing Range) and can be shown with six targets
simultaneously.

33

To execute the facility:

(1) Select the target from the radar display, place the

cursor over the target.   Press the centre (Select)
pushbutton, the target blinks to verify it has been
chosen.

(2) An information display on the target selected then

appears on the right side of the display. This
shows target information, as does target tote, but
can only display it in this way one target at a time.

34

To execute the tote mode:

(1) Place the cursor in the TOTE box, located over to

the top-right of the target information display,
press any of the pushbuttons to activate.

(2) The initial target information display is replaced by

the Target Tote display.  This shows information
on the speed/course (CRSE),range/bearing
(BRG), T CPA/CPA and BCT/BCR of six
independent targets. 

(3) To switch between the different data types:

(a) Place the cursor over the bar at the top of the

target information display. An information box
appears below the radar display: 

(b) Select until the data to be analysed appears.

(4) The ranking of the target information can be

arranged. The order can be TCPA within CPA ,
closest CPA or shortest TCPA. To switch through
the different ranking types:

(a) Place the cursor over the bar at the top of the

Target Tote display.

(b) Press the centre pushbutton continuously

until the ranking type you want to analyse
appears.

(5) To return to the single target information display,

place the cursor over the bar at the top of the target 
tote display then press the right-hand pushbutton.

PLOTTING  LIM I TA TIONS

35

Target plotting limitations using the ATA include the
following:

(1) Operator’s skill and accuracy when manually

entering the Ownship’s speed.

NOTE:

When using the manual speed input method, the Operator
MUST adjust the speed input manually every time that the
Ownship changes speed.

For sea stabilised displays, the input speed  MUST  be
Ownship’s  speed over the water NOT over the ground.

(2) A maximum of 20 targets can be tracked  at any

one  time. Attempts to track more than 20 targets
at once result in a TRACKING OVERLOAD alarm.

NOTE:

To track  another target, when 20 are already selected, one
of the currently tracked targets must first be removed  from 
tracking.

(3) The tracking accuracy of  the ATA  is  

±

 2 deg.  (or

±

3 deg., within 1 minute of a target manoeuvre).

(4) A maximum of 4 past positions only are displayed

for each tracked target.

KH 2020
Chap 2b

July 03

2b.4

Amdt 5

Next
Data

Full
Data

Next
Type

CD-1949

Summary of Contents for Kelvin Hughes Nucleus 3 5000 Series































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Kelvin Hughes Nucleus 3 5000 Series

Banner SureCross DX80SRxM-H Quick Start Manual preview
SureCross DX80SRxM-H
Brand: Banner Pages: 4
Kitsound BOOM DAB User Manual preview
BOOM DAB
Brand: Kitsound Pages: 8
Harman Kardon BALLAD Operation And Service Instructions Manual preview
BALLAD
Brand: Harman Kardon Pages: 8
i-box Attune Manual preview
Attune
Brand: i-box Pages: 56
RetroSound Santa Cruz Quick Start Manual preview
Santa Cruz
Brand: RetroSound Pages: 2
Spedal VP668 Series User Manual preview
VP668 Series
Brand: Spedal Pages: 27
Hyundai H-1625 Instruction Manual preview
H-1625
Brand: Hyundai Pages: 15
Hama 00054228 Operating Instructions Manual preview
00054228
Brand: Hama Pages: 50
Medion LIFE MD 43951 User Manual preview
LIFE MD 43951
Brand: Medion Pages: 154
Audiovox GMRS-1535 Owner'S Manual preview
GMRS-1535
Brand: Audiovox Pages: 26
Icom AT-180 Operating Instructions And Service Information preview
AT-180
Brand: Icom Pages: 9
Decatur Electronics GENESIS-VP User Manual preview
GENESIS-VP
Brand: Decatur Electronics Pages: 34
Decatur Electronics GHD User Manual preview
GHD
Brand: Decatur Electronics Pages: 41
Roadstar HRA-1300DAB+ Instruction Manual preview
HRA-1300DAB+
Brand: Roadstar Pages: 19
Sirius XM RAdio Lynx Home Dock Quick Start Manual preview
Lynx Home Dock
Brand: Sirius XM RAdio Pages: 2
Sirius XM RAdio Music For Business Quick Start Manual preview
Music For Business
Brand: Sirius XM RAdio Pages: 2
Sirius XM RAdio BR3 Quick Start Manual preview
BR3
Brand: Sirius XM RAdio Pages: 2
Sirius XM RAdio FMDA Installation Manual preview
FMDA
Brand: Sirius XM RAdio Pages: 10

Brands by name

Popular brands

Load more brands