Page
Right click
the Bluetooth icon located on your
Desktop or the System Tray, select
Add a
Bluetooth Device
.
At this point, the keypad must be placed in
discovery mode. First make sure the keypad is
turned on (check the on/off switch located at the
bottom of the keypad) then press the
Connect
button
also located at the bottom of the keypad.
The LED light on the top of the keypad will flash,
indicating the keypad is in discovery mode ready to
be connected to the computer.
Check
My device is set up and ready to be found
and click
Next
. This must be performed within 20
3.
4.
5.
Connect
On/Off
LED