W A R N I N G
Before attempting to operate the unit, read and
understand all safety precautions and warnings.
Do Not use this unit in a combustive environment.
Do not use the unit when tired, ill, or under the
influence of alcohol, drugs or medication.
Inspect unit before each use for loose, broken,
cracked, split, or damaged parts. Do Not operate the
unit with loose or damaged component parts.
Always wear safety glasses or goggles that are
marked with ANSI Z87
Use only in daylight or good artificial light.
Never use unit without the proper factory authorized
accessories attached. When using the unit, ensure
that the sprayer discharge hose is securely
attached.
Do not use Acetone, Laquers, Laquer Thinners, or
Acetate in this unit. These are flammable liquids and
will also permanently damage the internal
components of the sprayers pump.
Do not modify the unit
Page 3
Trouble shooting
SPRAYER WILL NOT START
✓
If battery is properly seated and fully charged
✓
If On/Off switch is in the off (counterclockwise) position
SPRAYER WILL NOT PRIME
✓
If pickup tube Screen or discharge hose is restricted
✓
If Spray tip on end of Wand is plugged
✓
If you are out of product
✓
For vacuum leak in pickup tube Gasket
SPRAYER OUTPUT VOLUME REDUCED
✓
If pickup tube Screen or discharge hose is restricted
✓
Sprayer wand and wand tip for restrictions
✓
Material is too high in viscosity
✓
Material is too cold
Page 12
Chemical Compatibility
