background image

SMOKE-FACTORY – 

DATA II 

Operating Instructions

 

5  Operating the  DATA II 

 

The 

DATA II 

is a powerful fog generator, producing every desired effect from a tiny puff of smoke to 

the thickest fog. Digital technology makes fine adjustments of the pump possible. In steps of 1% the 
output can be adjusted from 1-99%.

  

5.1 

Control panel  DATA II 

 

 

 

 

• 

TIMER-LED, red 

• 

READY-LED, green 

• 

DMX IN-LED, yellow 

 
 
 

• 

MODE 

 
 

• 

UP/DOWN 

• 

ENTER

 

 
 
 
 

5.2 

Switch of the device 

 

Press the Mode butten         

til  „OFF“ 

appears on the display.

 

 

  

 

After 15 seconds the machine will switch off automatically. On the right bottom edge of the display a 
red decimal point appear.

 

 

 

 

You can also switch off the machine within these 15 seconds by pressing the Enter-button. 

 

When you switch off the DMX signal, the machine will be switched off automatically after 15 
seconds.

 

 
 
 
 
Please note that the Mode button is not    

designed to scroll between the different menus.   

 
If you press the mode button longer than 2 sec. the display will change into the timer menue.

 

 

SMOKE FACTORY   
 

issue 1.0    Page: 7 of. 15 

 

FOG GENERATORS  NEBELMASCHINEN

  

Summary of Contents for Data ll
















Reviews: