Step 8:(34167G/34166GC/38207G Model)
Locate:
Note:
Procedure:
34167G/34166GC/38207G Door handle kit [13K]
The door handle kit [13K] consists of one door
handle (a), two 10-24x2” bolts (b), two 10-24 flat washers (c),
two 10-24 lock washers (d), two 1.5” long spacers (e)
and two caps (f).
With a flat washer (c) and lock washer (d) on a bolt (b),
insert each bolt through the door from the inside. From
the outside place a cap (f) and spacer (e) over each bolt.
Then thread the bolts into the handle (a).
Assembly
a
b
c d
e
f
Step 9:(34167G/34166GC/38207G Model)
Locate
Note
Tools Needed
Procedure
:34167G/34166GC/38207G Heat Indicator /
Nameplate [6]
: The heat indicator/nameplate [6] is supplied with
two M5 nuts [6A].
: Pliers
:
Mount the heat indicator/nameplate [6] to the front of the
door panel [2] using the three corresponding holes.
From the inside of the door panel, secure the nameplate
with the two supplied nuts
and tighten firmly.
[6A]
6
2
6A
continued...
Step 8:(30167G Model)
Locate:
Note:
Procedure:
30167G Door handle kit [13K]
The door handle kit [13K] consists of one door
handle (a), two 2” spacers (b) two 10-24x2 3/8” bolts (c),
two 10-24 lock washers (d).
With a lock washer (d) on a bolt (c),insert each bolt
through the door from the inside. From the outside
place a spacer (b) over each bolt.
Then thread the bolts into the handle (a).
a
c
d
b
Securely tighten all two bolts.
Securely tighten two bolts.
13
