Smoke hollow 30167G Assembly & Operation Download

Page: 24 / 24

Outdoor Leisure Products, Inc.

5400 Doniphan Drive

Neosho, MO 64850

trademarks of Outdoor Leisure Products, Inc. and are not to be

Outdoor Leisure Products, Inc.

Part Number:

3A09000

Revision B: Oct. 2006

used without express

permission by

This Smoke Hollow smoker is guaranteed against broken or damaged parts

at time of purchase. All parts carry a 1-year limited warranty with the

exception of the water bowl, which is guaranteed to be free of defects for 90

days. Paint is guaranteed to be free of defects for 90 days except for rust,

which may appear after repeated use.

This warranty does not cover damage or issues related to neglect, abuse, or modifications to the product. Repair

labor is not covered.

All parts that meet the warranty requirements will be shipped at no-charge via the discretion of the Customer

Service Department (ground shipments, US Mail, or Parcel Post ONLY). Any special handling charges (i.e.

Second Day, Overnight, etc.) will be the responsibility of the consumer.

All warranty claims apply only to the original purchaser and require a proof of purchase verifying purchase date.

Do not return parts to our address without first obtaining a return authorization number from our customer

service.

This service is available by calling 866-475-5180, 8:30am to 4:30pm, Central Time, Monday through Friday,

or write to Outdoor Leisure Products, Inc., 5400 Doniphan Drive, Neosho, MO 64850.

This warranty may give you specific legal rights that vary by state.

Limited Warranty

Summary of Contents for 30167G

























Search results

Summary of Contents for 30167G

Reviews:

Related manuals for 30167G

Brands by name

Popular brands

Smoke hollow 30167G, Assembly & Operation

Search results

Summary of Contents for 30167G

Reviews:

Related manuals for 30167G

Brands by name

Popular brands