4
Taifun
GT one
®
7. START UP
ATTACHING THE COIL
IMPORTANT
Only use coils made of suitable wires. The authorized retailer offers a wide range of different coils and can assist you in selecting the
right one.
First, the screws D and O are slightly unscrewed.
The ends of the coil are positioned under the screws.
Then bend the wire ends and retighten the screws D
and O again. This fixes the coil in place.
With a winding aid, the coil can still be
aligned somewhat.
Cut off the exceeding ends of the wire.
The coil should now be centered over the air hole.
WARNING
Use an ohm meter to check the resistance of the coil/device before using it. Don’t use the device, if a short circuit is de-tected. This
could lead to battery damage. Check if there is a contact between the coil ends and the surrounding parts.
!
!
