www.smoothfitness.co.uk
19
COMPUTER OPERATION
LEVEL MIN.
LEVEL
MAX.
LEVEL
1 0
4
2 1
5
3 2
6
4 3
7
5 4
8
6 5
9
7 6
10
8 7
11
9 8
12
10 9.0
13.0
11 10.0
14.0
12 11.0
15.0
During the workout, press the SPEED UP/DOWN buttons to adjust the speed. Users can overwrite the incline level by
pressing the INCLINE UP/DOWN buttons.
COOL DOWN
After the pre-set TIME counts down to 0, treadmill will start a one minute cool down program. The TIME LCD will display
COOL and blink for 10 seconds and continue counting down 50 seconds at speed 2 MPH/3.2KPH. After a one minute cool
down, the treadmill will stop and return to P2 start display. Press STOP/ENTER to go to POWER ON status.
P3 INTERVAL SPEED
If you select the P3 INTERVAL SPEED program, the upper and lower LCD will show the following:
After completing the user information set up, the SPEED, CALORIES and PULSE LCD display 0. The TIME display shows
factory setting 24:00 and a blinking workout load level shows 1. Press the INCLINE UP/DOWN buttons to adjust the workout
load level from 1 to 12 then press the STOP/ENTER button to confirm the setting. Then the TIME LCD will display a blinking
24:00. Press the INCLINE UP/DOWN buttons to adjust the total workout time and press STOP/ENTER button to confirm the
setting.
Press the START button to start the workout. The SPEED start and change follows the pre-set workout load speed chart as
below. The TIME counts down from the set up workout time. The CALORIES and DISTANCE count up from 0. INCLINE
LEVEL starts from level 0.
LEVEL
MIN. SPEED
MAX. SPEED
1 1.8
3.0
2 2.0
3.4
3 2.2
3.8
4 2.4
4.2
5 2.6
4.6
6 2.8
5.0
7 3.0
5.4
8 3.2
5.8
9 3.4
6.2
10 3.6
6.6
11 3.8
7.0
12 4.0
7.4
During the workout, press the INCLINE UP/DOWN button to adjust the incline level. Users can overwrite the speed by
pressing the SPEED UP/DOWN buttons.
COOL DOWN
After the pre-set TIME counts down to 0, the treadmill will start a one minute cool down program. The TIME LCD will display
COOL and blink for 10 seconds and continue counting down 50 seconds at a speed of 2MPH/3.2KPH. After the one minute
cool down, the treadmill will stop and return to P3 start display. Press STOP/ENTER to go to POWER ON status.
