CE 2.1E ELLIPTICAL TRAINER
www.smoothfitness.co.uk
11
ASSEMBLY
STEP 2
:
First make sure to connect the Wire Harness - Upper (109) with Wire Harness - Middle (103) and Hand Pulse Sensor Wire –
Upper (110) with Hand Pulse Sensor Wire – Middle (108) as shown below.
Attach the Computer (1) to the Front Upright Frame (2) using four M6 x 20mm Bolts (105).
NOTE:
Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires.
105
1
2