20
SMOOTH CE 3.0 XT ELLIPTICAL
ASSEMBLY
STEP 10
:
Attach the Console Base and Handlebars
(A) Place the console base #131 on top of the upright tube #68 and align the bolt
holes (See Fig. 10A)
(B) Secure the console base to the upright tube by using 3 x #18 Allen bolts.
Completely tighten the bolts now
(C) Attach the console base covers #132A and 132B around the console base and
secure the covers together by using 4 x #122 screws and 4 x #30 screws.
(See Fig.10B) Do not completely tighten these screws until step 11
(D) Feed the heart rate wire and toggle switch wires for the hand grips through the
small hole below the handlebar bracket then up through the top of the upright
tube. Lay the wires over the top of console base covers
(E) Attach and secure the handle bars to the handle bar bracket on the upright tube
by using 2 x #6 Allen head bolts. Completely tighten the bolts (See Fig 10C)
(F) Set both Left/Right upright post cover (#130A/#130B) to upright tube #68
tighten up both covers with four ( 4) screws (#135)
#18
6
#122
4
#30
2
#6
2
#135
4
Fig. 10A
Fig. 10B
Fig. 10C
NOTE: Parts 97A and 97B are
preassembled from the factory
Fig. 10D
Summary of Contents for CE-3.0 XT
Page 38: ...38 SMOOTH CE3 0 XT ELLIPTICAL...
Page 39: ...www smoothfitness com 39...
