18
“
C
ONSOLE
I
NSTRUCTIONS
–
P
ROGRAM (P2 ~ P7)
”
“
1
”
Press any button on the console or begin pedaling to turn on the console
d. Make sure that the power cord is properly plugged into the socket.
e. The console would automatically shut off after 4 minutes of inactivity
f.
Press any button on the console or begin pedaling to turn on the console. After a few seconds, the console will
then light up with a short beep sound, indicating the console will be ready for use
“
2
”
”HOLD TO RESET” button, an easy way to reset and enter into POWER ON status
Continue pressing
START/PAUSE
for 3 seconds, all the data will reset to the initial value and
the console will return to
POWER ON
status
“
3
”
MANUAL PROGRAM (P1)
“
A.
“
ENTER MANUAL PROGRAM (P2 ~ P7)
”
POWER ON status
ENTER
button:
When the power is turned on, the
manual program (P1) will be selected,
press the
ENTER
button to confirm and
enter
P2~P7
d.
START
/PAUSE
button: If you are currently
in another program (P2~P16), Press
START
/PAUSE
button to pause the
current program.
e.
Press
UP
or
DOWN
button to select
P2~P7
f.
Press
ENTER
button to confirm and enter
P2~P7
or
Summary of Contents for CE-3.0DS
Page 37: ...36 PRODUCT PARTS DRAWING...
