4
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
1
–
Stabilizer Assembly
a. Attach the
REAR STABILIZER(2)
, the one with
LEVELING CAP 76mm(76)
, onto the
MAIN FRAME(1)
with 2 x
CARRIAGE BOLTS(M8x85mm)(104)
and
Nylon lock Nut (M8)(105).
b. Attach the
FRONT STABILIZER(3)
onto the
MAIN FRAME(1)
with
SOCKET HEAD BOLTS
(M8x90mm)(94)
and
LOCK WASHERS(M8)(108)
.
NOTE:
You can adjust the LEVELING CAPS 76mm(76) on the REAR STABILIZER(2) to level the
machine.
S
TEP
2
–
Upright Post Assembly
a. Connect the
UPPER CONNECTION WIRE(37)
and
MIDDLE CONNECTION WIRE(38)
.
NOTE: After connecting the wires, verify the connection is properly made. Caution: Incorrect
connection may cause the computer to malfunction. Check that all pins in connector are not
bent.
b. Gently insert the
UPRIGHT POST(4)
into the
MAIN FRAME(1)
and secure with
2 x
SOCKET HEAD
BOLTS(M8x25mm)(92)
,
2 x LOCK WASHERS(M8)(108)
and
2 x
SOCKET HEAD
BOLTS(M8x50mm)(113)
,
2 x
LOCK WASHERS(M8)(108)
.
CAUTION Pinch Point: Be careful not to damage the wires when attaching the Upright post
Summary of Contents for CE-3.0DS
Page 37: ...36 PRODUCT PARTS DRAWING...
