8
“
S
ET
U
P &
O
PERATIONAL
I
NSTRUCTIONS
”
LEVELING
: Adjust the
LEVELING CAPS(76)
on the
REAR STABILIZER(2)
so that the item sets on the floor
without rocking. Reposition the LEVELING CAPS(76) on the REAR STABILIZER(2) in order to level the item.
MOVING
:
a. Before moving the CE-3.0DS, Make sure the unit is in Elliptical Mode Pictured below.
b. The unit has a pair of
MOVING WHEELS(75)
built into the
FRONT STABILIZER(3)
. It
’s recommended to
hold the
REAR STABILIZER(2)
with two hands and carefully pull the item to the desired location.
ELLIPTICAL MODE AND STEPPER MODE
Your CE-3.0DS can be used in the ELLIPTICAL mode or the
STEPPER mode. Refer to the illustration on the right to setup the
ELLIPTICAL mode or the STEPPER mode.
STEPPER MODE
:
Attach the
LINKAGE CONNECTORS(43)
to the
FRONT STABILIZER(3)
.
※
It is recommended to hold the stationary handle bar when in
stepper mode.
※
NOTE: STEPPER mode, works best with the crank
rotating backward.
ELLIPTICAL MODE
:
Insert the
LINKAGE CONNECTOR(43)
through the
CONNECTOR(45)
and secure
with the
LOCKING KNOB(44).
CAUTION
:
Securely tighten both
LOCKING
KNOBS(44)
before exercising.
Summary of Contents for CE-3.0DS
Page 37: ...36 PRODUCT PARTS DRAWING...
